Burst Pipe Leaky Pipe Plumber in Pape Village
At Preferred Plumbing Solutions Inc, we understand the importance of providing emergency plumbing services for residential and commercial customers. Our experienced team of plumbers are dedicated to making sure your plumbing needs are met quickly and efficiently, with same day service available in many cases.
Our Burst Pipe Leaky Pipe Plumber in Pape Village will respond quickly to address any problems you may have with burst pipes or leaky pipes. No matter what the issue is, our qualified technicians have the knowledge, experience and tools necessary to solve it.
Don’t wait until it’s too late – call us today for all of your plumbing needs! Call a plumber in Pape Village today for fast, reliable service – we guarantee satisfaction!
Things You Should Do When You Find a Burst Pipe
Finding a burst pipe can be a stressful and overwhelming experience. But don’t worry, Preferred Plumbing Solutions Inc. is here to help! Here are things you should do when you find a burst pipe in your home:
- Turn off the water main – The first and most important step is to turn off the water main as soon as possible.
- Locate the source of the leak – If possible, try to locate where exactly the leak is coming from so that it can be addressed quickly.
- Shut off any running faucets or appliances – Make sure to shut off all faucets or appliances that may be connected to the water system before attempting any repairs.
- Call us for emergency plumber – Sameday plumbing services are available in Pape Village, so don’t hesitate to contact us if you need help with a burst pipe.
- Open windows and doors – To reduce the risk of damage from water, open any nearby windows or doors to help with ventilation and drying.
- Unplug electrical devices from outlets – Make sure to unplug any electrical devices located near the pipe to avoid electrocution hazards.
- Clean up excess water – Once you’ve shut off the water main, use towels and buckets to clean up any standing water that may have accumulated around the area of the leak.
- Place containers under the leak – Place containers or buckets under the area of the leak to help capture any remaining water.
- Inspect walls and ceilings for damage – Look out for signs of damage to walls, ceilings or floors caused by the leaking pipe.
- Turn off your hot water heater – If necessary, turn off your hot water heater to avoid further damage from overheating.
- Move furniture away from affected areas – To prevent further damage, move any furniture away from the affected area of the burst pipe as soon as possible.
- Check all exposed pipes for damage – Once you’ve shut off the main valve, check all exposed pipes in your home for signs of leakage or other potential problems.
- Open all faucets after repairs have been made – Once repairs have been made, turn on the main valve and open all faucets in your home to ensure that everything is working properly.
- Have your pipes professionally inspected – Finally, consider having your plumbing system professionally inspected to identify any potential problems before they become major issues. Same-day emergency plumbing services are available in Pape Village so don’t hesitate to contact us today!
How To Emergency Repair Leaky Pipe
Leaky pipe joints can be a major nuisance, causing water damage and potentially costing you a lot of money in repairs. But don’t worry – with the right tools and a little knowledge, it’s possible to repair leaky pipe joints quickly and easily. Here are some steps for emergency repairing leaky pipe joints:
1. Turn off the water main – The first step is to turn off the main water supply, which should be located near your water meter or outdoor faucet.
2. Unscrew fittings – Using an adjustable wrench or pliers, loosen any compression fittings that may have been used to join two sections of pipe together. If there are no compression fittings, you may need to cut the pipes at the leaky joint.
3. Clean pipe surfaces – Next, use steel wool or sandpaper to carefully clean any debris from the pipe surfaces around the joint.
4. Apply primer and cement – Once the area is clean, apply a primer that’s compatible with your type of pipe, followed by solvent-based cement.
5. Wrap tape around joint – Before reassembling the pieces of pipe together, wrap a few layers of Teflon tape around the threads to create an airtight seal. Make sure not to wrap too tightly as this can cause damage to the pipe itself.
6. Reattach fittings – Using an adjustable wrench or plumbers tape, reattach the compression fittings or pipes together in order to seal the joint.
7. Turn on water main – Finally, turn on the main water supply again and check for any signs of leakage around the pipe joint. If everything looks good, you’re all set! Sameday plumbing emergency services are available near Pape Village so if further assistance is needed don’t hesitate to contact us today! We hope these tips have been helpful for emergency repair of leaky pipe joints. Be sure to follow all safety procedures when performing any type of plumbing repair work.
Free Outdoor Tap!
Purchase an outside tap replacement and receive a 2nd outside tap replacement at no charge!
Appointments are based on availability.
Why Choose Us
Fast & Efficient Service
We provide 100% results. If we can't fix your plumbing fixtures* you don't pay. That's a service.
Expert Plumbers That care
We have highly-skilled plumbers with the experience to fix any emergency plumbing matters in your house.
Know How Much You Pay
We are transparent throughout the process. Get a quote before we start. No surprise when we are done.
Our Reviews
We are hightly recomeeded on Google
Frequently Asked Questions
Do you offer emergency services?
Yes, we offer emergency plumbing services and same day services. If you have an emergency plumbing situation, please call us.
How can weather cause a pipe to burst?
All that added pressure can sometimes cause the pipes to explode as it cannot contain the ice buildup in your plumbing system. Oftentimes, the pressure will build and burst right out of the pipe wall or a weak joint in the plumbing system.
How do I add hot water to my outdoor shower?
Our plumbers are trained and experienced to do this. Once the connection to the hot water system is made, the outside shower will have both hot and cold water.
What is the difference between hard and soft water?
In addition, soft water can assist with reducing soap scum in sinks and showers while helping reverse some of the damage caused by hard water. Ultimately, the key difference between hard and soft water has to do with those mineral levels and their effects on plumbing systems.
What are some common causes of leaks at the base of toilets?
To fix a leak at the base of your toilet, you should first identify the source of the leak and then take action to address it. If you suspect that a worn or cracked wax ring is causing the issue, replacing it can often be done with relative ease.
Will a toilet leak at the base if the wax seal is bad?
How can I book a service call?
To book a service call with us, simply give us a call at 905-597-8555.
We look forward to working with you soon!